Custom Galvanized Steel Sheep Goat Lambing Continuous feeding tank 300 Kg
- The continuous feeding tank is used for feeding pellets and supplements for lambs.
- To be placed either inside the pen or out in the open.
- The lambs can feed 24 hours a day.
- Easy cleaning for optimal hygiene.
- Fodder stays dry and fresh.
- When the feeding tank is constantly full it has a capacity for ± 50 lambs
- Sizes: L x W x H = 2.5 x 0,60 x 0,85 m
- Product composed: 1 x continuous feeding pen 150 kg, 1 x Acces fence 1,50 m, 2 x Veno hurdle H = 0,85 m, L = 1,50 m, 4 x locking pin.
custom galvanized steel sheep goat lambing Creep feeder L = 2.45 m with safety hurdle
- For feeding the lambs.
- The feeding slots are adjustable to accomidate different head sizes of lambs.
- Adult sheep cannot get access to feed.
- With safety hurdle the lambs can always come out of the creep feeder.
- Feedig on both sides allowing 12 slots.
- Approx. 75 KGs storage.
- When the creepfeeder is constantly full it has capacity for ± 75 lambs.
- Two wide wheels for easy handling.
- Wheel, handle and roof must assemble by yourself.
- Maximum opening bars 17 cm.
- H = 0,58 m, B = 0,60 m
| FTWHRA15 |
1,25 m |
H: 0,58 m W: 0,60 m |
49,0 kg |
| FTWHRA16 |
2,45 m |
H: 0,58 m W: 0,60 m |
75,0 kg |
Custom Galvanized Steel English goat Sheep hay rack L = 1,25 m with 4 wheels
| FTWHRA13 |
1.25m |
H: 0,70 m W: 0,60 m |
49kg |
| FTWHRA14 |
2.45m |
H: 0,70 m W: 0,60 m |
75,0 kg |
Custom Galvanized Steel Hay rack with roof and trough L = 2.40 m on 4 legs
| FTWHRA07 |
1.20 m |
H 1.1m W: 0,50 m |
49.1kg |
| FTWHRA08 |
2.4m |
H 1.1m W: 0,50 m |
67.1kg |
Custom Galvanized Steel Hay rack L = 1,20 m on 4 legs
-
| FTWHRA05 |
1.20 m |
H 1.1m W: 0,50 m |
31kg |
| FTWHRA06 |
2.4m |
H 1.1m W: 0,50 m |
34.7kg |
Custom Galvanized Steel Half hay rack to attach on a wall with trough
L: 0,60 m - H: 0,50 m - W: 0,17 m 4,1 kg
Custom Galvanized Steel Wall hay rack L = 1,20 m with trough
L: 1,20 m - H: 0,70 m - W: 0,30 m 16,5 kg
Custom Galvanized Steel Hanging hay rack with trough 1.20 m
L: 1,20 m - H: 0,70 m - W: 0,30 m 19.3 kg
Custom Hot Dipped Galvanized Steel Sheep Mounted flatpack hay rack
- L x B x H = 0,55 x 0,46 x 0,58 m
- No wastage of hay.
- Mesh sizes: 75 mm x 50 mm.
- Hangs on hurdle so sheep can eat from both sides.
- Easy installation on top of existing Veno hurdles.
- Maximum hurdle width is 30 mm.
- Specially designed for 1,00 meter high hurdles.
mounted hay rack with wiring mesh
-
| FTB HR01 |
0.5 |
0.45 |
75.*55mm |
3,5 kg |
| FTB HR02 |
0.6 |
0.45 |
75.*55mm |
4,4 kg |
Custom Galvanized Steel Lambing hurdle with mesh wiring
- Ideal hurdle for sheep with lambs.
- Lambs are kept free from draft.
- The 40 cm-high synthetic casing prevents sheep from interacting with neighbouring pens.
- Easily put togther by locking pins, wall fastening and gimlets.
- Synthetic casing makes it easy to clean and reduce chances of disease.
| FTDMH01 |
0,85 |
1,23 m |
6.7kg |
| FTDMH02 |
0,85 m |
1,50 m |
8.8kg |
| FTDMH03 |
1 m |
1,23 m |
7.9kg |
| FTDMH04 |
1 m |
1,50 m |
10.2kg |
Custom Galvanized Steel Lambing hurdle with synthetic sheet
-
| FDWHS01 |
0,85 |
1,23 m |
10,9 kg |
| FDWHS02 |
0,85 m |
1,50 m |
12,5 kg |
| FDWHS03 |
0,85 m |
2m |
14.9kg |
| FDWHS04 |
1 m |
1,23 m |
12,7 kg |
| FDWHS05 |
1 m |
1,50 m |
14.6kg |
- The size can be made according customers' requirement.
| Framework |
7 Horizontal Rails |
| Side uprights |
25mm x 25mm x 1..5mm square section |
2pcs |
| Top Rail& Bottom Rail |
22Φx1mm round section |
2pcs |
| Infill rails |
21Φx1mm round section |
5pcs |
| Hurdle loop |
25 x4mm Flat |
2pcs |
| Brage |
25 x3mm Flat |
1pcs |
| Fixings |
interlocking up and over mechanism |
2pcs |
| Plastic end caps = 2 per panel |
| Finish |
Hot dipped zinc galvanised after fabrication to EU. Standards |
| Height |
3ft to top rail |
| Widths |
1.22m (4ft) 1.84m (6ft) |
| Package |
Bundle with plastics strapping, on wood pallet. |
1.Fencing Characteristics:
Durable, easy to installation, easy to moved, easy to transportation. Won't break down or collapse when cattle, pigs, sheep or other large livestock run into or rub against it.Welded one piece steel construction,virtually maintenance free,sag resistant,easy to erect, no stretching
2. Fencing Application:
Great for round pens, arenas, paddocks, overnite shows, trail rides and stalls. Designed for your horse safety with rounded corners (no sharp edges).
3.Fencing Advantages:
1.Our livestock cattle panel meets high standard, and is very popular in the market
2.the panel are inter-locking, very sturdy and easy install, no need to dig holes or lay foundations
3.the metal rails are hot dip galvanized before welding, thus has strong capability of anticorrosive.
4.Fencing
detailes.
| Sheep Hurdle 1 (F-001-0001) |
|
| Framework |
90cm x 150cm, 8 Horizontal Rails |
| Side uprights |
35mm x 35mm x 2mm square section 2pcs/panel |
| Top Rail& Bottom Rail |
28Φx1.5mm round section 2pcs/panel |
| Infill rails |
22Φx1.5mm round section 6pcs/panel |
| Pin holes |
30mm x 50mm x 5mm Flat |
| (hole 16mmx30mm) |
| Center strip |
20mm x 4mm Flat 1pcs/panel |
| Plastic end caps |
2 per panel 2pcs/panel |
| Finish |
Hot dipped zinc galvanized after fabrication to EU. Standards |
| Height |
90cm to top of top rail |
){kind=link}
){kind=link}